Series R PNEUMATIC ROLLER VIBRATORS

Maximum temperature 140°C=280°F Noise level range 75 to 100 dBA 1. Extruded aluminium alloy body
2. Cast iron liner
3. Steel alloy roller
4. Plastic end plates
5. Vertical air inlet
6. Horizontal air inlet
7. Air groove
8. Inlet jets
9. Exhaust ports
10. Exhaust diffuser
11. Silencer plate
12. Base mounting holes
13. Lateral mounting holes

 

DESCRIPTION

These compact pneumatic vibrators are simple in design and yet capable of delivering very high centrifugal forces.

The body is machined from an extruded aluminium section, inside of which a precision steel roller rotates, it is retained by two special high impact plastic end plates. For easy mounting, the body has four holes, two horizontal and two vertical.

Air is introduced through one of two inlet ports drilled at right angles to each other in the body. These inlet ports are tapped with a standard pipe thread and a pipe plug is provided for sealing the one not used.

The air is exhausted through the special high impact plastic end plates whose design incorporates an air silencer.

APPLICATION

Series R high frequency pneumatic roller vibrators provide a new approach in the movement of fine materials. Being pneumatically powered, the frequency can be controlled by the regulation of air pressure. Examples of their uses include:

‧ Emptying hoppers

‧ Agitation of small particles

‧ Moving of fine powders

‧ Compaction of plastic and concrete in moulds


PERFORMANCE DATA

Data obtained with a Kistler 3-Axis Dynamometer on a heavy laboratory test block
and displayed by a Kistler control monitor (COMO).
Frequency and force will decrease on a less rigid mount.
We reserve the right to improve, modify or withdraw specifications or products without notice or obligation.
DIMENSIONS *will accept NPT